.jpg)
|
DRYING OVEN |
The dried / sterilized at a high temperature to the device used for the purpose. Shorter time to reach the set temperature, It realizes a uniform temperature distribution over the forced circulation system. The smell and the dust was ensured user safety by the use of less advanced insulation.
Temperature compensation, real-time recorder and record the temperature as software Each position paper by the temperature test . Test chamber temperature holding time in case of power failure Return temperature response test when the door is closed after opening 30 seconds
Sliding-Type was equipped with a shelf to shelf to take advantage of the convenient self-test. The precise temperature control is possible by Auto Tuning PID control. There is a temperature safety device to prevent operation was greater than the set temperature more stable. Using a forced circulation method improves the temperature distribution of the drying efficiency. Digital precise temperature control is possible of 0.1 & lt; 0 & gt; C to the PID control unit. Overheating protection device. Alarm, timer, was equipped with an auto-tuning, temperature compensation function. The air heated by the Central Chamber back through the circular design delivered even by the fan motor It was achieved a good temperature distribution, a faster drying rate. Heater is quick to spread the slopes surrounding the air of a uniform temperature 'm a fan (Fan) It secured a high thermal efficiency and temperature uniformity. The heater and the fan motor is not running out of mechanical damage to the foreign object located on the back side of the chamber to the chamber bottom. All corners are rounded goby foreign objects do not leak into the outer chamber is easy to clean and easy maintenance. The shelf with adjustable height with 25mm interval is provided. Using advanced processing of mineral wool insulation of aluminum barrier. There is no odor, less dust. The operation of the heater and the fan stops when you open the door, and we consider your safety. RS-232c or 485 Interface port, software, com port cable, thermal printer (optional)
SPECIFICATION
|
MODEL NO
|
PHDO 100
|
PHDO 150
|
|
Dimension_IN(WxDxH)mm
|
500 x 400 x 500
|
500 x 500 x 600
|
|
Dimension_OUT(WxDxH)mm
|
645 x 670 x 760
|
645 x 770 x 860
|
|
Chamber volume(L)
|
100
|
150
|
|
Heater
|
1.0kw
|
1.2kw
|
|
Power consumption
|
4.8A
|
5.6A
|
|
Plug type
|
European 220 VAC STD plug
|
|
|
Electrical requirement
|
220 VAC 50/60 Hz
|
|
|
Electrical
|
Electrical leakage breaker, with the use of fuses which are optimal to each part, overcurrent is shut- off. |
|
|
Sensor
|
PT 100 Ω
|
|
|
Controller
|
Digital PID controller with timer, auto-tuning, 5 kinds of image print out |
|
|
Temp.Heating type
|
Direct heating by stainless steel incolony heater |
|
|
Temp.Range
|
1 Room temp 5℃ to 250℃ |
|
|
Temp.Accuracy
|
±2.0℃ at 150℃
|
|
|
Temp.Wait off timer
|
mm:ss 59 / hh:mm 99 / Continuous selectable
|
|
|
Temp.Heat up time to 120℃
|
Within 15 minutes
|
Within 20 minutes
|
|
Material-In
|
Stainless steel 0.8t SUS-304
|
|
|
Material-Out
|
Steel Plate with powder coating
|
|
|
Material- Insulation
|
Mineral wool 60mm/w woven aluminum barrier
|
|
|
Safety device
|
Over heat protector, PT sensor Heat protective barrier of controller box |
|
|
Shelves included
|
2
|
2
|
|
Option
|
RS-232c or 485 Interface port, software, com port cable, thermal printer |
|
|
Branch: 14 Fawzy Soliman St., From El Haram St., Giza, Egypt P.O.Box: 129 Giza, Egypt Code:12515 Tel. Fax:+(202) 33943004 / Mobile: +2 / 01223415321-01112221096-01011811884 |
