OPTIKA Series Fluorescence Microscope

FLUO SERIES Upright and Inverted - Epi-Fluorescence Microscopes
Imagine a fluorescence microscope that needs a lamp change every 50.000 hours.
Imagine a fluorescence microscope with a cold light source that barely heats up during use.
Imagine a fluorescence microscope that can be switched on, used immediately, switched off and then back on again.
Imagine a fluorescence microscope that is so safe as to need no protection shield whatsoever, and that can be used by everyone, without any specific precaution. 
Imagine a fluorescence microscope that can be powered by batteries, as easily as a torchlight.
Imagine a fluorescence microscope that is so sturdy and so compact that it can be used on the field, without any transport problems.
You may think that such an instrument exists in your imagination only.
Actually, such microscope is real, and its name is photoscience B-383LD.
Developed by the photoscience Research labs, the B-383LD marks a revolution in the field of fluorescence microscopy.
Strictly derived from the B-383FL model, of which it shares the body, the optics and the filter sets, the B-383LD employs high-power LED instead of the classical mercury vapour bulb.
The LED is tailored to the specific applications (FITC-TRITC).
The brightfield illuminator uses our X-LED^TM system, and the colour temperature closely matches sunlight.
The microscope is available in two versions: B-383LD1 and B-383LD2. 

OPTIKA Microscope Fluorescence Model B-1000FL-HBO

Type: FLUORESCENCE RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation
Transmitted illumination: X-LED⁸ (8W power).
Epi-illumination: Special attachment with built-in high-power colored LEDs.

OPTIKA Microscope Fluorescence Model B-1000FL-LED

Typology: LED FLUORESCENCE RESEARCH MICROSCOPE
Description: Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted and incident light observation. 
Version for LED epifluorescence analysis. 
Transmitted illumination: X-LED⁸ (8W power).
Epi-illumination:
Special attachment with built-in high-power colored LEDs.

OPTIKA Microscope Trinocular EPI fluorescence HBO illumination system B-500TiFL

Optical system: Mechanical tube lenght: IOS - Infinity Optical System; parfocal distance 45 mm. 
Head: Trinocular, 30° inclined, 360° rotating. Diopter adjustment; interpupillary distance adjustment 55-75 mm.
Eyepieces: Wide Field 10x/22 mm.
Nosepiece: 5-position reversed revolving nosepiece. Ball bearing linear guides.
Objectives: IOS Planachromatic FLUO 4x/0.13, 10x/0.30, 20x/0.50, 40x/0.75
Specimen stage: Double layer with mechanical sliding stage, 175x145 mm; moving range 76x51 mm.
Focusing system: Rack and pinion mechanism, with coaxial coarse and fine control knobs. Fine adjustment graduation 0.002 mm. Vertical movement range: 20 mm. Tension control on right side; upper stage drive stop on left side.
Condenser: Centrable Abbe condenser (swing-out type) with double lens. N.A. 0.9 Fitted with iris diaphragm. Height adjustment by a rack and pinion mechanism.
Transmitted illumination: X-LED³ illumination system.
Incident illumination: HBO 100W high pressure mercury bulb for epi-fluorescence.

Optika Trinocular EPI Fluorescence Microscope Mercury HBO B&G Filter set Model B-500TiFL ITALY

Specification
Optical system : Mechanical tube lenght: IOS - Infinity Optical System; parfocal distance 45 mm.
Head : Trinocular, 30° inclined, 360° rotating. Diopter adjustment; interpupillary distance adjustment 55-75 mm.
Eyepieces : Wide Field 10x/22 mm.

Nosepiece : 5-position reversed revolving nosepiece. Ball bearing linear guides.
Objectives : IOS Planachromatic FLUO 4x/0.13, 10x/0.30, 20x/0.50, 40x/0.75
Specimen stage : Double layer with mechanical sliding stage, 175x145 mm; moving range 76x51 mm.
Focusing system : Rack and pinion mechanism, with coaxial coarse and fine control knobs. Fine adjustment graduation 0.002 mm. Vertical movement range: 20 mm. Tension control on right side; upper stage drive stop on left side.
Condenser : Centrable Abbe condenser (swing-out type) with double lens. N.A. 0.9 Fitted with iris diaphragm. Height adjustment by a rack and pinion mechanism.
Transmitted illumination : X-LED³ illumination system.
Incident illumination : HBO 100W high pressure mercury bulb for epi-fluorescence.

Optika Trinocular Fluorescence Microscope Mercury HBO B&G Filterset Model B-383FL ITALY

Specification
Head : Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
Eyepieces : WF10X/20mm.
Nosepiece : 5-position reversed revolving nosepiece. Ball bearing rotation.
Objectives : IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, 100x/1.25 (oil).
Focusing system : Coaxial coarse and fine.
Stage : Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm. Belt-drive in X direction.
Condenser : Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Illumination : Transmitted light: X-LED³, with manual brightness control.
Epi-fluorescence: HBO 100W high pressure mercury bulb.
Standard filterset

Optika Trinocular Fluorescence Microscope LED B Filterset Model B-383LD1 ITALY

Specification
Head : Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
Eyepieces : WF10X/20mm
Nosepiece : 5 position on reversed revolving nosepiece. Ball bearing rotation.
Objectives : IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, and 50x/0.75 (no cover slide).
Focusing system : Coaxial coarse and fine.
Stage : Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm. Belt-drive in X direction.
Condenser : Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Illumination : Transmitted light: X-LED³, with manual brightness control.
Epi-fluorescence: high-power blue LED.
Standard filterset

Optika Trinocular Fluorescence Microscope IOS Ibjectives LED B&G Filter set Model B-383LD2 ITALY

Specification
Head : Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
Eyepieces : WF10X/20mm.
Nosepiece : 5-position reversed revolving nosepiece. 
Ball bearing rotation.
Objectives : IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, and 50x/0.75 (no cover slide).
Focusing system : Coaxial coarse and fine.

Stage : Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm.
Belt-drive in X direction
Condenser : Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Illumination : Transmitted light: X-LED3, with manual brightness control.
Epi-fluorescence: high-power white LED (for B ang G filtersets).
Standard filterset :

OPTIKA Microscope fluorescencia para Model SZP-FL 

Description: Fluorescence attachment for SZP stereomicroscopes. Fluorescence observation for biology, industrial inspection, criminal justice, etc. Essential tool for security printing and mineral research.
Filterset: Standard: GFP-B (EX460-500, DM505, BA510-560) GFP-L (EX460-500, DM505, BA510)
Illumination: 100W HBO high-pressure mercury vapor bulb. Average lamp lifetime: 400 hours. Input voltage: 110/240Vac, 50/60Hz, 1A ; Fuse: F8AL 250V. Maximum input power: 125W. Current and time counter LED displays.
Photo&Video Attachment: Trinocular output port